Toyota Replacement Car Keys
Modern car keys have electronic circuitry in addition to the physical key. Reprogramming keys for these can be costly due strict coding standards and the need to conform with local regulations.
Fortunately, there are ways to save money on Toyota keys for replacement as you travel around Belton and Killeen. The best method is to keep an extra key.
Lost Keys
In the past, losing keys to your car was easy, and you could get a new one for relatively inexpensive at the local hardware store or locksmiths for automobiles. However, now that cars are more advanced in technology keys are now more expensive to replace. This is due to transponder chip and proximity key technologies can make it impossible to start your vehicle without the right key fob. We suggest that you always have an extra car key at hand.
If you have lost your Toyota's key fob, or remote key (sometimes called a proximity key) the situation can become more complicated and costly. These keys emit an electronic code that disables your engine immobilizer, which is designed to keep potential thieves from hot-wiring the car and taking it.
Bring your car to the dealer along with a photo ID and proof of ownership documents. The dealer will then order an additional key and have it electronically linked to your car. The cost is usually between $200 and $250.
You may be able to save some money by purchasing a replacement key from an online retailer, however you should note that the quality of these keys can vary wildly. Some keys are finicky, and they often break in a short amount of period of time. Others might not function at all and could cause damage to your Toyota's computer system.
Luckily our locksmiths on mobile are well adept at handling the complexity of modern keys for cars. Our mobile locksmiths are not only adept at resolving issues but also in creating new key fobs which seamlessly sync up with the advanced Toyota system. We can replace your key fob and remotely program it into your vehicle to ensure that you're back in operation in the shortest time possible.
Depending on the year of your Toyota and the complexity of its keyless entry or start system, you might need to have your Engine Control Computer "reflashed" to accept the new key. This process overwrites the current data on the computer chip and replaces it with new (clean) data. It's similar to when you format your personal computer's hard drive and then start from scratch.
Transponder Chip Issues
Chipped keys (also known as transponder keys) have been in use for some time and are a fantastic anti-theft device. They work to prevent car thieves from hot-wiring a vehicle and then starting it. They accomplish this by using an embedded microchip that transmits signals to your car when it is inserted into the ignition.
toyota replacement key fob are radio waves that activate the chip. When activated the chip responds with an identifier that your car recognizes. It's basically like sending your driver's license to the bank clerk. Once your key is inserted, it will unlock the doors and begin the engine.
If you lose your keys that are chipped you'll have to replace them with a brand new one. Unfortunately, it will cost more the traditional metal key since there's more technology involved. It's worth it since you're protecting your car and yourself against thieves.
This service is not available in all hardware stores and locksmiths. This service will likely be provided by your local Toyota dealership. They will have the best chance of recognizing your car's key. They can also program your key into your car.
This process involves connecting the key to a special programer that extracts the data required for the computer in your car to recognize it. Then it will match the code of your key with a transponder that is new and program it to the car's system. This will stop your car from starting with any other key.
Despite this incredible technology, your chipped keys can stop working at times. You may notice this if the key won't turn on the engine or unlock your doors. This indicates that the transponder chip likely to be defective.
To fix this problem you'll need to visit your local Toyota dealer and have the chip reprogrammed to your vehicle. You'll need your photo ID along with the VIN number of the vehicle to the dealership in order to complete the process.
Key Fob Battery Issues
If you have a key fob that's stopped working, it might be time to replace the battery. It can be very frustrating to have an inoperable or dying key fob, however this is often something you can fix relatively easily. There are many things that can cause this issue but, in the majority of instances, it is the simple necessity of an entirely new battery.
The first step is to open the case of the fob. It's pretty simple to do. Just insert a flat tool like a screwdriver into the small slot that your key fits into, and then open the case. This allows you to access the circuit board in green, and you can then remove the battery. Be sure to note the kind of battery you require (which is usually written on the original battery, or can be found in the owner's manual) and then purchase another one and replace it. Make sure that the new battery is correctly seated inside the case and circuit board, and then test it to be sure that it's working correctly.
In addition, excessive use can cause the battery of a keyfob to degrade quickly. It is difficult to avoid draining the battery more quickly if you use your fob more frequently than if it was only used frequently. Extreme temperatures, humidity and electrical interference from other electronic devices can cause a battery to die quickly. It is a good idea to keep your key fob safe from such objects to prolong its life.
If your key fob needs multiple clicks to lock and unlock, then it's time to replace it. If you need to press the fob multiple times, it could be that your battery is depleted. It is also a good idea to have an additional battery installed when you find that your fob is susceptible to corroding. This is because of the large amount of electronic components and metals in the car, and could lead to a short in the battery or other parts of the fob.
Contact Us
Contact us if you're experiencing issues with your Toyota remote start or key fob. We'll get you a new battery for your key fob or a replacement for your lost one, and have it installed quickly and scratch-free.
There are many things that can cause the car key to stop working, from a broken circuit board or transponder chip to battery that is worn out. You must know what type of key fob your Toyota has so you can get the correct replacement battery.
Toyota key fobs are available in a variety of shapes and sizes. They are designed with advanced security features that can block unauthorised access to the vehicle. They are also equipped with transponder chips that communicate with your immobilizer, allowing the engine to start only when the proper key is put in.
If your key fob has stopped working or is not turning on, the first thing to do is retrace your steps, and then look the location you usually put it. If you're still having trouble finding your keys, you should contact an auto dealer or locksmith who is specialized in automotive fobs. They can help you find your keys or get an alternative one made while you wait.
If you have the number of the key, an expert locksmith or Toyota dealership should be able make a replacement Toyota key. The procedure typically involves cutting a new key and programming the immobilizer system to work with it. The locksmith or dealer will then test the key to make sure that it is able to unlock and lock your doors and also start the engine.
It is recommended to have a spare Toyota key. This will stop you from getting locked out of your vehicle, and stranded somewhere in the middle of nowhere. A spare key makes it simpler to replace your keys in the event that they wear out or become damaged. A spare key can be kept in a safe location and you can make use of the free Toyota key locater app on your smartphone to locate it when you need it.